3M Filtrete 3US-AF01 Standard Replacement Water Filter

By: 3M

In stock

Manufacturer Part # 3US-AF01 Our Item # IA3465

3M Filtrete Replacement Standard Under-Sink Faucet Water Filter Model 3US-AF01

Fits Models:
Filtrete Water Systems: 3US-AS01 (Standard), 3US-PS01 (Advanced).

Product Specifications:

  • 5 Micron Removal
  • Reduces Chlorine Taste and Odor for great tasting water
  • Reduces Sand, Sediment, Rust and Soil (5 microns)
  • Tested and certified by NSF International against NSF/ANSI Standard 42 for Chlorine Taste and Odor reduction
  • Maximum Operating Pressure: 25 to 125 psi
  • Maximum Temperature: 40-100°F
  • Rated Flow: 2.0 gpm (7.6 lpm)
  • Capacity: 2,000 gallons (7,751 liters)
  • Product Dimensions: 10-7/16" x 3-3/16"
  • Weight: 1.4 lbs
  • Made in USA from globally sourced materials
Filtrete Replacement Filter Benefits:

  • Maintains water flow
  • Quick, easy, no mess filter changes
  • Filtered water direct from existing faucet
  • No tools needed for filter changes
  • Filter change indicator
  • Filter lasts up to 6 months. Filter life varies depending on local water conditions and volume of water used. Replace if a noticeable drop in pressure occurs at the faucet.
  • Easy filter change with just a quarter turn. Insert - Twist - That's it!
Easy Installation:

  • Turn filter cartridge slowly to the left, about a quarter turn, until it stops. At this position, both inlet and outlet ports are closed and water pressure has been relieved.
  • Pull used filter cartridge straight down and discard. Note: There may be a small amount of residual water drainage after pressure is relieved and during filter cartridge removal.
  • Push new filter cartridge into filter head. Turn cartridge a quarter turn to the right until it stops. Top surface of cartridge will become flush with bottom of head when fully engaged.
  • Turn on cold water at faucet for five minutes to flush new filter, expelling trapped air. Water may run cloudy initially but will clear.